Dentistry

SHERIDAN, WYOMING - May 19, 2026 - Dentsply Sirona has announced that its Primescan 2 Cart has received the 2026 iF Design Award in the Product Design - Medicine / Health category, recognizing its ergonomic engineering, clinician-focused usability, and integration into cloud-based digital dental workflows. The award highlights the system's role in supporting more mobile, connected intraoral scanning environments as digital dentistry adoption continues to expand globally. The recognition also reflects increasing industry emphasis on workflow efficiency, portability, and system integration within modern dental practices transitioning toward cloud-native clinical infrastructure.

SHERIDAN, WYOMING - May 13, 2026 - Dentsply Sirona and the American Association for Dental, Oral, and Craniofacial Research (AADOCR) have announced the winners of the 2026 Student Competition for Advancing Dental Research and its Application (SCADA) Awards, recognizing pre-doctoral dental students for research excellence across clinical and basic science disciplines. The awards were presented during the 55th Annual Meeting of AADOCR, held in conjunction with the 104th General Session and Exhibition of the IADR and the 50th Annual Meeting of the Canadian Association for Dental Research, at the San Diego Convention Center from March 25 to 28, 2026. This year's competition drew 61 dental students from across the United States and seven international finalists from Canada, France, Thailand, Taiwan, South Korea, and Japan.

SHERIDAN, WYOMING - April 4, 2026 - Dental clinicians managing deep cavity restorations and endodontic retreatment decisions now have a richer evidence base to draw from, as Septodont USA's February 2026 clinical newsletter consolidates two-year trial outcomes for BioRoot® Flow and four documented case studies applying Biodentine® in the Bio-Bulk Fill technique for indirect restorations.

Biodentine Bio-Bulk Fill: four clinical cases document deep cavity restoration

Septodont's Case Studies Collection 28 presents workflows from four clinicians who used Biodentine®'s dentine-like mechanical and biological properties to restore deep cavities using the Bio-Bulk Fill technique. The cases extend the application of the material to symptomatic cracked teeth - a notoriously difficult clinical scenario where pulp status is uncertain and cavity geometry is irregular.

SHERIDAN, WYOMING - December 19, 2025 - Henry Schein One says adoption of its cloud-native Dentrix Ascend platform is accelerating as dental groups and DSOs move away from legacy practice management systems to standardize operations, reduce administrative friction, and embed AI into everyday workflows.

Cloud migration becomes a scaling decision, not an IT project
Across U.S. dentistry, consolidation and multi-location growth are forcing operators to treat practice management software as core infrastructure. Henry Schein One reported that nearly 600 practices migrated from alternative systems to Ascend over the past 12 months, adding to the broader Dentrix customer base of more than 48,000 practices using Dentrix technology for clinical, operational, and financial workflows. The company also said monthly Ascend installations more than doubled year over year as practices transitioned away from legacy setups.

SHERIDAN, WYOMING - December 8, 2025 - SprintRay's acquisition of the EnvisionTEC dental product portfolio marks a strategic step in the consolidation of the dental 3D printing market, expanding its materials ecosystem, reinforcing supply resilience and giving both SprintRay and EnvisionTEC users clearer long-term pathways in digital production.

What Changes for SprintRay Customers: More Materials, Same Workflow

For existing SprintRay practices and labs, the immediate impact is about breadth rather than disruption. The EnvisionTEC dental portfolio brings additional validated resin formulations that SprintRay is adapting for its own printers, which means customers gain more material options without having to invest in new hardware.

SHERIDAN, WYOMING - December 8, 2025 - As more practices adopt chairside 3D printing, many clinicians worry quietly about what it means for long-standing dental lab relationships-but rather than replacing labs, in-house production is reshaping them into higher-value, more strategic partnerships built around clearly defined roles and shared digital workflows.

From Full Lab Dependency to Hybrid Production

For years, the dominant model in restorative and appliance production has been full lab dependency: every crown, bridge, model, surgical guide, night guard or retainer went out the door to a third-party provider. In that setup, "Lab controls your timeline. Lab controls your cost per case. Lab capacity limits your capacity. Emergency cases wait on lab availability."

SHERIDAN, WYOMING - December 8, 2025 - Chairside 3D printing has moved from conference buzzword to everyday reality in U.S. dental practices, and SprintRay is positioning its ecosystem as a way for clinics to bring production in-house, compress treatment timelines, and turn same-day crowns into a strategic differentiator rather than a marketing slogan.

From Lab Dependency to In-Practice Production

At its core, "chairside" simply means producing the restoration in your own practice while the patient is still in your care, instead of sending cases to an external lab and waiting one to two weeks. Clinically, the workflow is familiar-examination, preparation, design and cementation remain the same-but the fabrication step moves from a third party you can't control to equipment in your operatory that you can.

SHERIDAN, WYOMING - November 13, 2025 - Dentsply Sirona is strengthening its long-term commitment to increasing oral-health access for U.S. veterans, deepening its partnership with Dental Lifeline Network (DLN) and activating employee-driven support initiatives across the country. The renewed collaboration aligns with the company's global sustainability strategy and reflects a growing corporate focus on social-impact programs that directly address care gaps in underserved populations.

Strengthening a Decades-Long Collaboration

Dentsply Sirona and DLN have worked together since 1999, forming one of the dental industry's most enduring corporate-nonprofit collaborations. Entering its 26th year, the partnership includes direct financial support, in-kind product donations and professional-volunteer mobilization through Dentsply Sirona's VETERANS@DS employee resource group.

SHERIDAN, WYOMING - November 13, 2025 - Dentsply Sirona and Rapid Shape have jointly advanced digital denture manufacturing by validating the Lucitone Digital Print Denture System across Rapid Shape's D50+, D90+ and PRO 20 3D printers. The collaboration expands access to high-strength printable denture materials and fully automated workflows, helping dental laboratories scale production as technician shortages and patient demand intensify globally.

A Major Expansion of Validated Digital Denture Workflows

SHERIDAN, WYOMING - November 13, 2025 - Dentsply Sirona celebrated two decades of its Global Clinical Case Contest (GCCC), honoring dental students who demonstrated exceptional restorative dentistry skills and a growing mastery of digital workflows. The anniversary event highlighted how the company continues to invest in early-career clinicians, raising global standards in esthetic and functional dentistry through hands-on education, mentorship and modern restorative technologies.

A Milestone Year for an International Training Platform